Labem | Desoldering stations

Desoldering stations

Below you will find our selection of service stations with an integrated pump; requiring compressed air supply 4-6 bar; and hot air stations for SMD PLCC, QFP, BGA systems.

Below you will find our selection of service stations with an integrated pump; requiring compressed air supply 4-6 bar; and hot air stations for SMD PLCC, QFP, BGA systems.

Labem | Desoldering stations

Stations with a built-in pump

WX SMART | WX Air

WX Smart + WX Air

  • Advanced two-channel digital station.
  • Two tools can be used simultaneously. 
  • Only WX series tools can be connected.
  • Additional WX Air module with built-in compressor can be connected. It allows to use desoldering iron WXDP 120 and hot air blower WXHAP 200.
  • Power supply 230V, 300W. 
  • Can be regulated via PC, smartphone, tablet. Application Weller WXSmart available. 
  • WiFi, LAN, USB, RS232 available. Complies with  “Industry 4.0”
  • Touch panel is ESD safe and temperature resistant. Can be operated in gloves or just touching with hot iron tip. 
  • Smooth, independent temperature control of each channel in the range of 150-450 ° C (150-550 ° C for WXHAP 200).
  • Air volume control for WXHAP 200. 
  • The possibility of blocking the temperature control, setting the saving function of the tip through the software.
  • Antistatic version, earthed socket.
  • Recommended for service applications.
  • More info here…

WR 3000M | 53368699

WR 3000M

  • Three-channel digital station.
  • Allows three tools to be connected simultaneously.
  • The set includes a solder sucker DSX 80, soldering iron WP 80 and a hot air blower of the new type HAP 200.
  • In set with vacuum pipette for lifting components.
  • Smooth, independent temperature control of each channel using buttons, in the range of 150-450 ° C (150-550 ° C for HAP 200).
  • Air flow regulation for HAP 200. Digital display.
  • The possibility of blocking the temperature control, setting the saving function of the tip through the software.
  • The station has a built-in USB interface.
  • Antistatic version, earthed socket.
  • The set includes a power supply, WP 80 soldering iron, DSX 80 desoldering iron, HAP 200 blower, stands, vacuum pipette, USB cable, software, cleaning kit, DSX 112 and DSX 113 nozzles, set of gaskets, spare filter, grounded plug, sponges and WDC cleaner 2.
  • Recommended for service applications.

WRK | 51515599

WRK

  • Desoldering kit for WR 3000M station. Using the heads included in the kit, you can solder SMD components quickly and safely.
  • The heads are connected to the station’s vacuum system, then the component is desoldered with a hot air blower.
  • The component is lifted automatically after all pins are desoldered.

 

Recommended for service applications.

WR 3000M ER | 53368870

WR 3000M ER

  • A three-channel digital station in a newer configuration.
  • Allows three tools to be connected simultaneously.
  • The set includes solder sucker DSX 120, soldering iron WP 120 and hot air blower HAP 200.
  • Complete with vacuum pipette for lifting components.
  • Smooth, independent temperature control of each channel using buttons, in the range of 150-450 ° C (150-550 ° C for HAP 200).
  • Air flow regulation for HAP 200.
  • Digital display.
  • The possibility of blocking the temperature control, setting the saving function of the tip through the software.
  • The station has a built-in USB interface.
  • Antistatic version, earthed socket.
  • The set includes a power supply, WP 80 soldering iron, DSX 120 desoldering iron, HAP 200 blower, stands, vacuum pipette, USB cable, software, cleaning kit, DSX 112 and DSX 113 nozzles, set of gaskets, spare filter, grounded plug, sponges and WDC cleaner 2.
  • Recommended for service applications.

WXR 3030, WXR 3031 i WXR 3032

Our new WX series bestsellers

  • The WXR 3000 series stations are three-channel digital stations.
  • They enable the simultaneous connection of three tools.
  • Compared to the WR 3000M station, additional functions built into the tools have been added: setting memory and motion sensor.
  • Added the ability to remotely control heating plates and fume extractors from the WX
  • Compatible series.
  • The set includes a solder sucker WXDP 120, soldering iron WXP 120 or WXP 65, hot air blower WXHAP 200 and a vacuum pipette for lifting components.
  • Smooth, independent temperature control of each channel using buttons, in the range of 150-450 ° C (150-550 ° C for WXHAP 200).
  • Air volume control for WXHAP 200.
  • Digital display.
  • The possibility of blocking the temperature control, setting the saving function of the tip through the software.
  • The station has a built-in USB interface.
  • Antistatic version, earthed socket.
  • Recommended for service applications.

WR 2000ER | 53380870

WR 2000ER

  • Two-channel digital station (2 tools included).
  • Enables the simultaneous connection of two tools.
  • The set includes a solder sucker DSX 120 and a soldering iron WP 65.
  • Optionally, you can connect a hot air blower HAP 1 (ordered separately).
  • Note: It is not possible to connect the DSX 120 suction and HAP 1 blower at the same time.
  • Smooth, independent temperature control of each channel using buttons, in the range of 150-450 ° C (150-550 ° C for HAP 1).
  • Air flow control for HAP 1.
  • Digital display.
  • The possibility of blocking the temperature regulation, setting the saving function of the tip.
  • Antistatic version, earthed socket.
  • The set includes a power supply, WP 65 soldering iron, DSX 120 soldering iron, stands, cleaning kit for DSX 120, DSX 112 and DSX 113 nozzles, set of gaskets, spare filter, grounded plug and sponges.
  • Note: It is not possible to connect the DSX 120 suction and the HAP 1 blower at the same time.

WR 2002 | 53380699

WR 2002

  • Two-channel digital station (2 tools included).
  • Enables the simultaneous connection of two tools.
  • The set includes a solder sucker DSX 120 and a soldering iron WP 65.
  • Optionally, you can connect a hot air blower HAP 1 (ordered separately).
  • Note: It is not possible to connect the DSX 120 suction and HAP 1 blower at the same time.
  • Smooth, independent temperature control of each channel using buttons, in the range of 150-450 ° C (150-550 ° C for HAP 1).
  • Air flow control for HAP 1.
  • Digital display.
  • The possibility of blocking the temperature regulation, setting the saving function of the tip.
  • Antistatic version, earthed socket.
  • The set includes a power supply, WP 65 soldering iron, DSX 120 soldering iron, stands, cleaning kit for DSX 120, DSX 112 and DSX 113 nozzles, set of gaskets, spare filter, grounded plug and sponges.
  • Note: It is not possible to connect the DSX 120 suction and the HAP 1 blower at the same time.

WR 2000D | 53379699

WR 2000D

  • Two-channel digital station with solder suction.
  • Smooth temperature control with buttons, in the range of 150-450 ° C (150-550 ° C for HAP 1).
  • Air flow control for HAP 1.
  • Digital display.
  • The possibility of blocking the temperature regulation, setting the saving function of the tip.
  • Antistatic version, earthed socket.
  • The set includes a power supply, soldering iron, stand, cleaning kit, DSX 112 and DSX 113 nozzles, set of gaskets, spare filter, grounded plug.
  • There are tips for solder suction of DSX series and desoldering of SMD circuits (SO, PLCC, QFP, …).
  • Allows you to connect any tool: solder sucker DS 80, HAP 1 blower, soldering irons, …
  • Note: It is not possible to connect the DSX 80 suction and HAP 1 blower at the same time

WR 2000A | 53378699

WR 2000A

  • Two-channel digital station with HAP 1 hot air blower.
  • Enables soldering and desoldering of SMD circuits (SO, PLCC, QFP, …).
  • Smooth temperature control with buttons, in the range of 150-450 ° C (150-550 ° C for HAP 1).
  • Air flow control for HAP 1.
  • Digital display.
  • The possibility of blocking the temperature regulation, setting the saving function of the tip.
  • Antistatic version, earthed socket.
  • The set includes a power supply, soldering iron, stand, grounding plug and sponge.
  • A range of Rxx, Dxx and Qxx series tips are available.
  • Allows you to connect any tool: solder sucker DS 80, HAP 1 blower, soldering irons, …
  • Note: It is not possible to connect the DSX 80 suction and HAP 1 blower at the same time.

Labem | Desoldering stations

Stations that require
compressed air supply 4-6 bar

WXD 2010 | 53428699

New station with desoldering WXDP 120 - 120W

  • The new WXDP 120 desoldering iron with a power of 120W ensures quick desoldering of points with high heat capacity.
  • The new WXP 120 soldering iron has a very short distance between the handle and the tip.
  • The power of 120W ensures fast soldering of points with high heat capacity.
  • The XT series tip design developed by Weller and the patented “heat pump” technology allow for high temperature dynamics avoiding the need for expensive tips with an integrated heater and temperature sensor.
  • A large LCD touch panel provides clear information about the work of the soldering station
  • Smooth temperature control via touch knob, in the range of 50-450 ° C.
  • The soldering irons have a built-in position sensor – the tip saving function is activated if the soldering iron lies on the stand for a given time.
  • The soldering irons have a built-in settings memory – connecting the soldering iron to another power supply does not change the settings.
  • The following functions can be set: calibration, programmable temperature reduction during work breaks (setback), temperature lock, switching off the station after a preset time.
  • The antistatic stand allows you to set the soldering iron in four positions
  • Built-in USB port and included software allow temperature measurement for archiving to ISO protocols
  • Antistatic version, earthed socket.

WXD 2020 | 53429699

New station with WXDP 120 desoldering iron and WXP 120 soldering iron!

  • The new WXDP 120 desoldering iron with a power of 120W ensures quick desoldering of points with high heat capacity.
  • The new WXP 120 soldering iron has a very short distance between the handle and the tip.
  • The power of 120W ensures fast soldering of points with high heat capacity.
  • The XT series tip design developed by Weller and the patented “heat pump” technology allow for high temperature dynamics avoiding the need for expensive tips with an integrated heater and temperature sensor.
  • A large LCD touch panel provides clear information about the work of the soldering station
  • Smooth temperature control via touch knob, in the range of 50-450 ° C.
  • The soldering irons have a built-in position sensor – the tip saving function is activated if the soldering iron lies on the stand for a given time.
  • The soldering irons have a built-in settings memory – connecting the soldering iron to another power supply does not change the settings.
  • The following functions can be set: calibration, programmable temperature reduction during work breaks (setback), temperature lock, switching off the station after a preset time.
  • The antistatic stand allows you to set the soldering iron in four positions
  • Built-in USB port and included software allow temperature measurement for archiving to ISO protocols
  • Antistatic version, earthed socket.

WXA 2010 | 53430699

New WXHAP 200 - 200W blower station!

  • The station enables soldering and desoldering of SMD circuits (SO, PLCC, QFP, …).
  • A range of Rxx, Dxx and Qxx series tips are available.
  • A large LCD touch panel provides clear information about the work of the soldering station
  • Smooth temperature control via touch knob, in the range of 50-550 ° C.
  • The blower has a built-in settings memory – connecting the soldering iron to another power supply does not change the settings.
  • The following functions can be set: calibration, programmable temperature reduction during work breaks (setback), temperature lock, switching off the station after a preset time.
  • The antistatic stand allows you to set the soldering iron in four positions
  • Built-in USB port and included software allow temperature measurement for archiving to ISO protocols
  • Antistatic version, earthed socket.

WDD 81V | 53256699

WDD 81V

  • Solder suction station.
  • Smooth temperature control with buttons, in the range of 150-450 ° C.
  • Digital display.
  • The possibility of blocking the temperature regulation, setting the saving function of the tip (WCB 1 or WCB 2 necessary).
  • Antistatic version, earthed socket.
  • Complete with power supply, soldering iron, stand, cleaning kit, DSX 112 and DSX 113 nozzles, set of gaskets, spare filter, grounded plug, compressed air hose and sponge.
  • There are tips for solder suction of DSX series and desoldering of SMD circuits (SO, PLCC, QFP, …).

WAD 101 | 53266699

WAD 101

  • HAP 1 hot air blower station.
    Enables soldering and desoldering of SMD circuits (SO, PLCC, QFP, …).
  • Smooth temperature control with buttons, in the range of 150-550 ° C.
  • Digital display.
  • The possibility of blocking the temperature regulation, setting the saving function of the tip (WCB 1 or WCB 2 necessary).
  • Antistatic version, earthed socket.
  • The set includes a power supply, soldering iron, stand, grounded plug, compressed air cable and sponge.
  • A range of Rxx, Dxx and Qxx series tips are available.

Labem | Desoldering stations

Hot air stations for
SMD PLCC, QFP, BGA

WHA 3000

WHA 3000

  • The WHA 3000 station enables soldering and servicing of BGA, QFP, PLCC systems.
  • It is possible to set a three-stage temperature profile.
  • A wide selection of nozzles is available, the station can be equipped with a stand and a bottom heating plate.
  • 700W power.

WTHA 1

WTHA 1

  • Economical hot air station with a 900W blower.
  • Enables soldering and servicing of large QFP and PLCC chips.
  • It is possible to adjust the temperature in the range from 50 ° C to 550 ° C and air flow up to 50l / min.
    5 temperature profiles can be saved.
  • Built-in turbine, no built-in vacuum.
  • Standby and calibration functions.
  • A wide selection of nozzles is available, fitted with an adapter.
  • 900W power

About us

The satisfaction of our customers is the most important thing for us, therefore we make every effort to ensure that orders are carried out quickly and that the offered goods are of the highest quality. Thanks to the commitment of our specialists who are willing to provide advice, shopping in our online store becomes pure pleasure.

Contact

LABEM S.C. Stanisław Żochowski, Marek Żochowski
ul. Sibeliusa 22
02-641 Warsaw
office@labem.pl
+48 22 646 27 9
+48 22 844 01 57

+48 797 519 782
+48 780 077 254

Useful links

OFFER
NEWS
ABOUT US
DOWNLOAD
CONTACT

Copyright © LABEM S. C.
All rights reserved. Privacy Policy
Made with ♥︎ by Skydoo